Beaman
Two Stroke
In the process of replacing my indicator bulbs with LEDS I ended up damaging a prong in the neutral boot. Ended up getting another boot - but the inside diameter is too big.....So, I sacrificed the high beam to get my neutral again. No neutral light, but ironically I was able to put the new boot on the high beam indicator and by squeezing it I made it work. My theory was that if the circuit for the high beam was dead it would affect the neutral as well. Still no neutral with spliced wires switched to both wires....
My bigger problem is that I have to have the sidestand up to turn on the bike now, even when it is in neutral. Is the neutral indicator circuit preventing the neutral switch from working? Thoughts?
Thanks!
P.S. Did a little research and it is the neutral switch. Guess I'll get it fixed the next time that I go for servicing...
My bigger problem is that I have to have the sidestand up to turn on the bike now, even when it is in neutral. Is the neutral indicator circuit preventing the neutral switch from working? Thoughts?
Thanks!
P.S. Did a little research and it is the neutral switch. Guess I'll get it fixed the next time that I go for servicing...
Last edited: