F3 conversion?

[MattRat]

Sorry guys...been kinda busy lately. The swap was very easy. The front rim swaped out without having to figure out spacing. Just flip the rim around to match the back and use the stock F3 spacers. The rear was a little more challenging juggling spacers around between the bonnie and F3, but through trial and error it fit without any special machining of spacers or anything.

Greg

Greg, do you have a parts lits?

 

[Bottle_Fed]

Yeah...plus it looks bad ass!!

Matt- The F2 rear rim is 4.5" and the F3 is 5" either one will work, just make sure you get the spacers with the wheel. The bonnie disk has the same bolt pattern and bolts right up. You will need the F2 or F3 front wheel and spacers, along with the axle. The F3 has floating disk and the F2 doesn't. Once you flip the front wheel around use the spacers for the F2/3, they have the same spacing.

Greg

 

[sweatmachine]

You will need the F2 or F3 front wheel and spacers, along with the axle. The F3 has floating disk and the F2 doesn't. Once you flip the front wheel around use the spacers for the F2/3, they have the same spacing.

Greg

don't forget the forks and brakes!

 

[Bottle_Fed]

hahaha...yep, yep...right right!