Search results

Do you have a cable and tuneecu? You could use tuneecu to compare your current map with the custom map on the tuneecu site... LINK You don't have to load it to just compare. You can use the option in the software - differences in the mapping will be notated with a white dot. Couldn't...

Has anyone had any luck hitting the leftover outline with 1500-2000 grit sandpaper (wet) and then buffing? Figured I'd try that before worrying about repainting. -Flip

Great work - had a couple small, wtf moments (why won't this ignition switch sit all the way down? Oh, because I'm supposed to use these supplied spacers...) But I figured those out in about 30 seconds. :pick: Got this as an early father's day gift and couldn't be happier. Thanks! - Flip

So I hacked off more extraneous bits from the bike this morning. Even fabbed up a half-assed rectifier relo bracket and moved the horn under the tank (now that I'm typing this, I forgot to make sure that worked...). Complete AI removal was a breeze - used a 13mm box end wrench and some M12x1.25...

Heat gun and a fingernail worked for me. Cleaned up the residue with a bit of wd-40. I didn't know that they were cleared over until a little too late. So now I have the outline of the stickers on my sides. Not noticable unless your a couple feet away. I'll end up repainting them one of these...

Probably not - are you burning any oil? You could also check the compression if it's going to keep you up at night... If you don't have a tester, Harbor Freight sells 'em for ~$20.

Bonneville SE's run 7/8" bars

I don't think things have gotten worse, it's just that we have video and pictures of EVERYTHING. Also, weather and disaster trends and records are a relatively recent advent. - Flip

Thanks for the heads up - only broadcast info I could find for Velocity was on http://www.tvracer.com for June 2nd from 10-11pm.

Stumbled across this old-ish article/editorial from MC mag. Enjoy, Flip Parallel Universe Q Parallel-twins are usually made with 180-degree cranks. I suppose this allows the engine to be smoother as inertial forces are in balance. The firing order works out to 540 and 180...

Sure did. Had a good experience with their sales team. :D

TuneECU link, a USB to 16 pin OBDII cable with FTDI chipset and your trusty laptop. Do some research, but the fuel injection on these bikes is not all that complicated, and you should be able to flash that ECU quite easily.

Posted this over in the Welcome center, but here's an updated pic with the exhaust and front signals.

Needs some honda F3 forks....:up:

New Bonneville rider from St Louis - previous ride was a Speed Triple. Thought it was time to slow down a bit... Never been so happy riding around at 40mph. . She's a 2011 SE, currently have a TEC 2-1 exhaust, superbike bars, napoleon mirrors, hand made rear turn signal brackets, dime city...

Just finished up everything - installed the Dime City tail and made some signal brackets. I made the brackets out of some scrap aluminum with a hacksaw and some hand files. I'll probably end up picking up some British Customs ones, but we'll see. The tail isn't level, but I'm planning on...