Aussiebikerdave
Scooter
Preparations are underway to run the Scrambler in the BEARS supporting races at the Bel Ray 6 Hour at Phillip Island December 3-4. We hope to have a new muffler end pipe fabricated and a small handlebar fairing installed by race day as well as a bit more dyno time to eek out some more power. Here are some pics of the bike as it currently stands...
The bars are genuine Triumph Thruxton items so we cut 25mm from the bottom of the headlight brackets to fit the bars in. The LH clutch lever clamp is off a KTM so that is probably worth an extra 5mph down Gardiner Straight! Note the snap-lid food storage container holding all the wiring tucked in behind the front numberplate! Pretty cool eh?
The bars are genuine Triumph Thruxton items so we cut 25mm from the bottom of the headlight brackets to fit the bars in. The LH clutch lever clamp is off a KTM so that is probably worth an extra 5mph down Gardiner Straight! Note the snap-lid food storage container holding all the wiring tucked in behind the front numberplate! Pretty cool eh?
Last edited: