Sal Paradise
Hooligan
I have this little old Japanese bike and I am cafeing it. I need to get a 2 into 1 exhaust on it but there is none available. I ordered a compatible system for another bike but the flanges are different. I cut off the flange and about 2" of the stock header pipe... I can hammer in the stub of the stock header until the flange is all the way in. Its tight. I can then drill and put a stainless screw there if I am worried about it moving at all. That's a new exhaust gasket to seal that joint. Its invisible on the bike, I just mocked it up. But will it work? Anyone ever do anything like this? Does it look workable? Or shouldl I send this system back and search on?
Look at this -
here is the bike...
Look at this -
here is the bike...
Last edited: