Scrambler Pegs

[wiseanhyzer]

The stock pegs break easy and aren't my preference anyway.
What foot pegs from other bikes would fit the Scrambler? I know some riders have taken pegs from dirt bikes and modified them to fit the Scram. What about pegs off other bikes, street, dual, whatever? What modifications are necessary to fit other pegs to the Scram?
Please sound off if you've got some experience.

 

[bikebits]

there's some information in post # 317 here:
http://www.advrider.com/forums/showthread.php?t=141616&page=25

I did the conversion and if you have a Dremel with a small grinding wheel for minor adjustments to the pegs it's easy to rig up. Instead of the small weld I drilled and tapped the peg and inserted an Allen head bolt for the spacer.

If you get the pegs it's simple to figure out.

 

[blacktiger]

Oberon do pegs for the Scram. http://www.oberon-performance.co.uk/acatalog/Triumph_Scrambler.html
I have just today fitted them to mine but haven't ridden the bike with them yet. The only possible problem is that they are shorter than the OE pegs. I've sent an e-mail to them today about this suggesting that they should be 20mm longer, especially the exhaust side, when standing on the pegs, because the exhaust kicks your leg outwards.

 

[wiseanhyzer]

Yeah I still have the Oberon Pegs in the back of my mind. I finally got these RM pegs on and I'll try them out for a while. Hell of a lot cheaper than the Oberon ones right now.

 

[gweldoncone]

Oberon do pegs for the Scram. http://www.oberon-performance.co.uk/acatalog/Triumph_Scrambler.html
I have just today fitted them to mine but haven't ridden the bike with them yet. The only possible problem is that they are shorter than the OE pegs. I've sent an e-mail to them today about this suggesting that they should be 20mm longer, especially the exhaust side, when standing on the pegs, because the exhaust kicks your leg outwards.

Do you know if these will fit the Bonneville?

 

[wiseanhyzer]

Do you know if these will fit the Bonneville?

http://www.oberon-performance.co.uk/acatalog/Triumph_Bonneville.html

 

[Rhodie]

Yeah I still have the Oberon Pegs in the back of my mind. I finally got these RM pegs on and I'll try them out for a while. Hell of a lot cheaper than the Oberon ones right now.

IMO Wiseanhyzer's choice are a far better option especially with the Work's Connection Weld-On footpeg extenders
http://www.worksconnection.com/store/product.html?prod_id=26
than the Oberon's which I tried, and relegated to pillion.

So I had a bash at my own