Right hand Ignition Switch Bracket

[RumRunner]

OK so I decided I needed to make a Right hand ignition switch bracket. (Where the factory should have put it in the first place)

So here's what I came up with. Not perfect, but works great. I might make another one a little longer to tuck the switch up into the tank a touch more.

 

[Arkwright]

Is there enough wire to reach from it's original position, or do you have to add more wire?

Cheers
Arkie...

 

[RumRunner]

Is there enough wire to reach from it's original position, or do you have to add more wire?

Cheers
Arkie...

Arkie,

Yes there is plenty of wire... (You might have to pull some of the extra wire out of the headlight bucket)

RR

 

[motosteve01]

Cool, I may have to make one.

 

[RumRunner]

Cool, I may have to make one.

It's a pretty simple project to make, if you do I'd suggest rotating the switch so the mounting holes are more up and down (to make the bracket look smaller) and bring it up a little closer to the tank so it blends in more. I'll most likely do that over the winter.