Flip
Scooter
Just finished up everything - installed the Dime City tail and made some signal brackets. I made the brackets out of some scrap aluminum with a hacksaw and some hand files. I'll probably end up picking up some British Customs ones, but we'll see.
The tail isn't level, but I'm planning on bobbing the fender at a later date, so knock that out when I bob it.
I hacked up the factory harness, and soldered and heat shrink wrapped everything. The wiring under the fender ain't pretty, but it's water tight.
Next weekend I've got the front signals and a Tec 2-1 exhaust to tackle..
Oh, one tip - the yellow on the Dime City tail is the ground.....
The tail isn't level, but I'm planning on bobbing the fender at a later date, so knock that out when I bob it.
I hacked up the factory harness, and soldered and heat shrink wrapped everything. The wiring under the fender ain't pretty, but it's water tight.
Next weekend I've got the front signals and a Tec 2-1 exhaust to tackle..
Oh, one tip - the yellow on the Dime City tail is the ground.....