Recent content by HayMike

Think hundreds, not thousands, if it has a title. Mike

Just had my son do his first MC paint job a few weeks ago, used this from Harbor Freight: http://www.harborfreight.com/20-oz-high-volume-low-pressure-gravity-feed-spray-gun-47016.html Did a great job for a first timer. Easy to use and adjust. Very easy to clean! Mike

Is it possible you missed one or more of the ground wires? Maybe to one to ground from the starter solenoid or the ignition module? There sre several which are easy to miss because they are grouped together inside the harness. Mike

LMT, I did what you want to do. First learn the stock wiring diagram from the manual, then take all the tape off the harness and match each wire to the diagram. This is a lot harder than it seems. Once you know what everything is and does, it will be easy to remove a lot of wire, some...

It is an ilco X105 over here too. Not what it says on the website, but it works. Mike

I agree 1500-2000, if it is complete and has a good title. Mike

I don't think that is the diode pack. The diodes are loose in the wiring loom. I will see if I have the ones I removed and let you know. Pinwall is a good dealer, but they aren't always accurate, you have to look closely. Mike

From Dallas... http://www.youtube.com/watch?v=YbEFFGN2fxQ Alternative-country

Sweat, great song, never heard of the band before, found this video... http://www.youtube.com/watch?v=NIQbPZXj51E

It is held on by two 6 X 1MM hex head flange bolts. Not sure of the length.

Clean and lube the twist tube. Mike

I agree completely, you'll be more bothered by people who want to ask about the bike and trip than want to hurt you. Mike

At least you don't need the long sleeves for protection from your work environment. Mike

They're slightly shorter, a little louder, deeper sounding, still look the same. Mike