5 3/4" headlight

wils36

moped
Has anyone here used the British Customs headlight and bracket or put a smaller headlight on their Bonneville? If you have any pics I would like to see them.
 
I made my own setup. I got a 5-3/4" sidemount headlight off ebay for about $25 and made my own brackets out of some exhaust P-clamps. Total cost was under $40. I had to relocate the connectors etc under the gas tank. The stock headlight holds a ton of stuff inside.

Cheapo P-clamps (less than $5 each):

53-4headlight001.jpg


Bang bang bang:

53-4headlight009.jpg


Cut/drill/trim:

53-4headlight024.jpg


test fit:

53-4headlight019.jpg


I also drilled out the bucket for some LED idiot lights:

53-4headlight041.jpg


53-4headlight058.jpg


Paint the whole thing black, and add a Vapor digital gauge:

vapormounted.jpg


Nice and tidy:

198032_1607959640241_1273707195_1347281_7890941_n.jpg


DSCN0461.jpg
 
Last edited:

wils36

moped
That's really sharp. I have a T100 with the speedo and tach I need to worry about if I go that route. From the look of yours, they will stand out and look out of place. Thanks for the idea.
 
Top