Question about an older Tiger 93-04

[RumRunner]

Anyone here have an older Tiger? Something in the 93 - 04 range? I'm trying to get some measurements off of the spoked front wheel to see if it would work for a project.

Thanks,

Doug

 

[aeronca]

howdy RumRunner, i have a 95' tiger. what measurements are you looking for?

 

[RumRunner]

aeronca,

Thank you very much that would be great!

Here's What I'm looking for:
- The width of the front forks inside edge to inside edge.
- The distance from the inside of the forks to the outside (closest to the fork) of each rotor.
- The width outside to outside of each rotor.

Thanks again in advance.

Doug

 

[aeronca]

Ok, i'll try and get some measurements for you here real soon. Also, you can get a ton of info on tigers over at tigertriple.com - lots of steamer stuff(a steamer is a carbed tiger 93'-99')

 

[aeronca]

here's a pick of mine:ride:

 

[RumRunner]

Thanks. Pretty bike

 

[aeronca]

Ok, hope this right - I didn't have my calipers so all measurements are with a tape.


inside to inside of the forks are 5 and 5/8th in.

inside fork to outside of rotor is roughly a 1/4 in

outside to outside of each rotor is 5"

hope this helps. eric

 

[RumRunner]

Ok, hope this right - I didn't have my calipers so all measurements are with a tape.


inside to inside of the forks are 5 and 5/8th in.

inside fork to outside of rotor is roughly a 1/4 in

outside to outside of each rotor is 5"

hope this helps. eric

Eric,

Thank you very much. This should help give me what I'm looking for.

Cheers,

Doug