I'll show you mine if you'll show me your's! PICTURE THREAD

[fredv]

Coast to Coast to Coast on New 2016 T120

Here I am on Atlantic Beach, FL on my new Bonnie fitted with Hepco Becker bags. Next stop Moto GP in Austin and then San Diego and back to FLA.

 

[fredv]

Here are 4 more pix of new Bonnie T120 with Hepco Becker bags on my recent coast to coast to coast trip.

 

[D9]

Fred - these look like cool road trip pics, but they're so small can
barely see what's going on - got anything higher res / more pixels you
can post?

D9

 

[DandyDoug]

I tried to enlarge the pictures but cannot .
Any chance you can do as D9 asked and enlarge them a little ??

 

[rbirkey]

Here's my 2008 Bonneville Black, with some serious customizing done since then!

 

[Motley]

Looks like you put quite a bit of work into it...nice.

 

[rbirkey]

Yes, I have.... here's a partial list:

Bonneville Performance Items:
- Rebuilt 1100cc racing engine: 94 HP, 76 Ft.lbs. torque, ported and polished head with oversized valves, racing cams, balanced crankshaft, Nikasil lined cylinders, Wiseco pistons, Carillo rods.
- Oil Pressure Gauge Kit
- Oil Cooler Kit
- Mikuni Carb Kit
- 2 into 1 stainless steel exhaust system
- Crankcase oil breather canister system and racing check valve

Other
Sato Racing Rearsets
D9 Bonneville Brackets headlight brackets - Sharky V1
D9 Bonneville Brackets lay flat instrument bracket, ignition relocation and instrument cups
Triumph Solo Seat with carrier
Triumph Rear seat rail
Triumph Heritahe tank badges - repainted/reversed logo
Excel alum. wheels, Talon Billet Hubs
Bobbed and shaved fenders
Superbrace front fork brace
Euro style gaiters
Customized side covers
Traxxion front fork double action cartridges and rebuilt forks
Superlite 520 chain and sprocket conversion kit
British Customs Airbox removal kit
British Customs retro LED taillight
Retro bullet-style turn signals and running lights (double filament)
High output LED headlamp bulb (low/high)
Triumph Speedmaster front brake master cylinder
Brembo 4-piston front brake caliper, with floating rotor
Motone rear brake relocation bracket
Spiegler stainless steel braided brake lines
Barnett stainless steel braided clutch and throttle cables
Racetech custom rear shocks
Earth-X Lithium battery
Mosfet Regulator/Rectifier
Procomm programmable CDI
Barnett heavy duty clutch with Red springs to handle the torque
Joker Machine billet clutch/brake levers
Joker Machine bar end mirrors
Drag style handlebars
Retro hand grips
Rebuilt rear brake caliper
Stainless fasteners used throughout

 

[thruxiegirl]

 

[thruxiegirl]

 

[thruxiegirl]

 

[D9]

rbirkey... very cool bike... and what a sleeper!

 

[D9]

Charlene, you rock... as ever... anybody that can ride
two bikes at once - through the mountains no less - is my hero
:motorbike2:

 

[thruxiegirl]

Charlene, you rock... as ever... anybody that can ride
two bikes at once - through the mountains no less - is my hero
:motorbike2:

Ha! I had my partner in crime. I talked a chick from motorcross into riding streets. It's good to have riding bff.

 

[thruxiegirl]

Meet Evelyn guys. One hell of a dirt rider, good momma, and beer connoisseur.

 

[Motley]

It's coming along nicely, thanks...

 

[B06Tang]

Did you put Thruxton headers on it?

 

[Motley]

Yeah, the headers are off my '05 Thruxton. It was the only way to get the Staintunes to fit.

 

[B06Tang]

I had my '07 set up that way too and really loved it. Nice to get to the rear wheel without having to take them off too plus the up-sweep look is really great.

 

[beemerrich]

Yeah, the headers are off my '05 Thruxton. It was the only way to get the Staintunes to fit.

How do you like the staintunes? I picked up a set and want to tone down my thruxton a bit...so its either fitting those or the TEC 2 into 1 system that is sitting in my spares.

 

[rbirkey]

Here are the results of the first Dyno run of my 2008 Bonneville Black with the 1100cc Bonneville Performance engine.