Search results

  1. G

    Slightly customised Scrambler

    The latest incarnation :-)
  2. G

    Norman Hyde Rearsets

    I have a set for the scrambler, but they would probably be no good for the Bonnie. Rob
  3. G

    2013 bonneville suspension advice

    I have both the Honda stanchions and the Ricor Intimidators........both are an excellent value for money purchase. Rob
  4. G

    Handlebar Clamp

    http://www.newbonnevilleriders.com/forum/showthread.php?t=9361 should all be in there
  5. G

    My Scronnaqueen

    The bike sits about 3.5cm higher..read much better for me. The forks work properly, and I will have Ohlins on the back in the next two weeks........
  6. G

    My Scronnaqueen

    yep, with cbr600 stanchions and cartridges.....if you look at the last picture you can just see the adjusters
  7. G

    My Scronnaqueen

    Thought you might like to see my latest project.........forks are CBR600 and rear shocks are from a scrambler...started off as a Bonnie.
  8. G

    Handlebar Clamp

    yep...:crazy:
  9. G

    Handlebar Clamp

    The 7/8 handlebar clamps from the Thunderbird 900 fit. I have a set on my scrambler. Rob
  10. G

    What is the latest about the starting/battery/ECU problems in EFI Bonnevilles?

    I've had my scram for 18 months.no problem. Ron
  11. G

    Ricors in, bike up

    I'm just about to fit some cbr600 stanchions on the front to level up the scrambler rear shocks I already have on the Bonnie....it will without doubt make both the side and centrestands redundant....so I need to work out what'll fit. Rob
  12. G

    Ricors in, bike up

    Has anyone fitted a Thruxton side or centrestand to their Bonnie? Does it fit with factory exhausts?
  13. G

    Slightly customised Scrambler

    Unfortunately, they went out of stock 60 years or so ago......... Rob
  14. G

    TORS on an EFI Scrambler

    I have both the TORs and the map................I have used Tune ECU..........I wonder if it would be possible to zip the map and email it? Rob
  15. G

    Scrambler pulling to the right

    As you say it may well be twisted....the cure in the old days was to slacken everything (yoke clamps) and bump it against a wall and then tighten everything..hey presto.fixed....always worth checking the rear wheel has been adjusted correctly when adjusting the chain. Rob
  16. G

    Slightly customised Scrambler

    The headlight bowl is a WD BSA B40 unit. It was new old stock (60 years old!!). I had to open out the speedo hole to fit the triumph unit, punch holes out to fit the idiot lights and trip re-set, and then had it powder coated black. I used a Thunderbird speedo rubber to line the hole (and...
  17. G

    Slightly customised Scrambler

    I'm thinking about putting a zener diode and heatsink on the front indicator bracket for 'cosmetic' reasons Rob
  18. G

    Slightly customised Scrambler

    I've added some close ups of the headlight. Thanks for the comments. Rob
  19. G

    Slightly customised Scrambler

    Well, I've finished my winter scrambler mods..........a bit late, but at least they're finished......... I really didn't like the clock/headlight setup, so that came off. I wanted to retain the factory clock in case I ever want to sell it so the mileage will be true. The headlight shell is...
  20. G

    Speedo mounted in headlight bucket of my T100

    I can only congratulate you on your skill as a tinbasher..........I've been looking to do a similar conversion on my scrambler, and not having the skills that you obviously do led me down a different path. I've just sent my bucket off to be powdercoated. I have a couple of pictures, but don't...
  21. G

    Who has relocated their ignition? What to do with old bracket?

    I bought a Joker bracket for my '08 EFI scram, but the ignition lock bolts are 6mm, and the Joker bracket has 4mm holes............they say they've never had a problem............ However, back to your question, I intended doing exactly that......lightly drill out the weld, use my dremel...
Top