Recent content by mikenva

sorry I didnt get back to you the other day I think you are right. damn I should start building motors for these bikes for part time money lol. about 4 to 6 hrs to build one, if you have your chit together.

you payed for the parts and machine work and the guy says 1200 is not enough to build the motor? If so he is fucking nuts.

you should be good to go now about 90% of the time they take the white bearings that's why I keep a set here and start checking with them. If the whites are not right it will be to loose and you can figure from there.

The trouble is that the holes where not bored right at triumph. The holes are in spec from right to left but to small up and down. I think what caused this could be one of 2 things. ether the cases where aligned bored the old way with the cases bolted together and there was burs or trash in...

Dunlop GT 501

he has a 07 bike should not need that he has the beefed up cases on his motor.

good happy for you.

air impact wrench will pull nut right off then put bike in gear to use torque wrench to put it back on.

I think going to a wider rear tire is one of the best things you can do to these bikes for highway use have run 140 and now a 150 both are much more stable then stock (don't try to go with groves in the road and such. not all 150 tires will work on the stock rim though you need to go by what the...

we need to have another trip like that .How about that crazy guy from ny that lane spilt them old ladies on I81 at about100 mph in front of me lol. God I was waiting on them old ladies to wreck in front of me he scared them so bad lol. lol hedge is nuts lol got to love him.

good luck man sounds like you will do fine

yea its got a few things done to the motor it grew to 1087 cc

the sound of a slow loud bike got to love it here is mine https://www.youtube.com/watch?v=ChkSeK4njls&feature=youtu.be

Make sure you have the fuel line hooked up to the bottom line on the carbs if you had them off.If they are hooked to the top tee it will flood bad.140 to 145 mains should do it

LOL you beat me I was about to post that.