I'll show you mine if you'll show me your's! PICTURE THREAD

A couple weeks ago, the day I brought it home.

PO4Y3B3h.jpg


Break-in service done, new exhaust and heated grips.

dFz2chch.jpg
 

Wire-Wheels

New member
Nice Speed Twin. I have yet to see one of those face-to-face. Don't have any new bikes to show, but I do have a few old ones. Here is one of mine. ...J.D.203822
 
Last edited:
Performed surgery a couple weeks ago... Removed my cat and installed an x-pipe. It comes to about a 5-6lb. weight savings. The job was finicky and a royal PITA.

First.. I had to make sure I all the appropriate tools for the job.

HSTxaczh.jpg


Now, I was able to get busy...

WrTOlcjh.jpg


CFMe75ch.jpg


s9kBxEdh.jpg


Left side exhaust removed and sub frame rail loosened, I was able to pull the cat out

uOi6ggoh.jpg


R4vI9LJh.jpg


Motone Customs X-Pipe replacing the cat.

DH3JGKnh.jpg


After 3 hours, job done.

MNNcAtGh.jpg
 

rbirkey

NBRAdmin
Staff member
Nice! I've done that job before! After you do it once, the next time it goes a lot faster! How do you like the exhaust note change? I like that nice low thump it provides!
 

Wire-Wheels

New member
Here is another one of my Hinckley bikes. It is a 1995 Sprint. Has the 97h.p. 6 speed that has been tweeked a bit. Re-jetted Mikuni's, modified airbox, high flow exhaust. Chassis has Race Tech front fork mods, Acron 6 piston calipers, Dunlop Road-Smarts. Notice the radiator cover. She runs a bit cool, even here in the Mohave Desert. One photo is all dressed up for touring. The other photo is stripped down for an afternoon in the twisties. I've owned this bike since 2002. ...J.D.203827203828
 

Brylcreem

Scooter
Here are some updated pics as my 05 bonnie now has twin clocks, sump guard, centre stand, a Lucas style rear light, plus short bullet indicators and the ignition relocated .View attachment 203869A4CF1763-9657-4B1F-8504-C1F919FBB256.jpeg86E16A4E-4254-4E3D-9E93-5CD70EB9F29F.jpeg
Before pics on page 69
 

Attachments

  • B868E936-884E-4107-83CB-EF1A68738325.jpeg
    B868E936-884E-4107-83CB-EF1A68738325.jpeg
    208.5 KB · Views: 14
Last edited:

Brylcreem

Scooter
Updated pics with new mods, Triumph fork gaiters and 2nd hand very cheap classic seat, Burton DS 003 with gold triumph lettering on the back, very happy.
 

Attachments

  • CAF0A936-365F-47DD-956D-8CB2858B9439.jpeg
    CAF0A936-365F-47DD-956D-8CB2858B9439.jpeg
    166.3 KB · Views: 4
Last edited:
It's been a while....

A couple updates:

Removed the multi-functional tail light/turn signals and replaced the tail light with the Euro spec unit along with a set of Rizoma Club turn signals. And added a gel pad along with a Luimoto seat cover.

eVTL97jh.jpg


rRO6bHvh.jpg


gznfJxMh.jpg


94mhf9Oh.jpg


Now that my bike is about where I want it, the kid pick up his first bike - a '73 Norton 850 Commando. The plan is a complete tear down and rebuild. Though it's not a Bonneville, I'll just share a couple pictures with you...

XiJtos9h.jpg


TZHZrDkh.jpg


4gBIKATh.jpg


cYrme6qh.jpg
 

snake89

moped
This is the latest version of my Urban Bonnie Scrambler. Searching for the best 50/50 tires now.
 

Attachments

  • Triumph with tail tidy.jpg
    Triumph with tail tidy.jpg
    345.9 KB · Views: 4
Top