Announcement

Collapse
No announcement yet.

Front fender help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Front fender help

    I want to change out my front fender to a shorter scrambler style fender but I'm not real sure how to mount it. All the fenders I have seen don't come with any mounting hardware but say to use the factory bolts. My fender in riveted on in the center between the forks so do I have to drill out those rivets and replace them with some type of bolts?

  • #2
    look at your front fender from ground level there should be two bolts on each side of the front fork that attach the front fender to the fork. these are the bolts they are referring to as Factory bolts. there is a small sheet metal brace that ties the two fork legs together it bolts to the fork sliders and its riveted to the front fender.

    Comment


    • #3
      So when you put on a new fender do you have to also purchase a new fork brace as well?

      Comment


      • #4
        I cut my stock fender on my 2012 Bonnie and had it repainted. It's really pretty easy if you plan carefully and take your time. No new brace or mounting issues.

        Comment

        Working...
        X