Search results

FS: Exhaust, seat, rear shocks, rear fender, gas cap, handlebars I'd like the handlebars. Do you still have the bars? Are they scratched up any? wbarnier

Tune ECU I appreciate you getting back to me fender. What I know of Tune ECU is that you have to have a special cable that is sold at various online suppliers that will connect from a laptop computer and the bikes ECU. You must also download the free software from the internet and install it...

Does anyone on this forum live in the Milwaukee, Wisconsin area? The reason I ask is because I am not that computer savvy and I don't have a laptop. If you have a Tune ECU setup already and would be willing to help me with an injector balance-synch and a correction for my speedometer, I would be...

risers These are the absolute best risers to raise bars 1and 1/2" and back 2". No need to change any of the cables but you will need to remove the lowest clutch cable stay. The come in silver or black. wbarnier...

Sai Sorry, yes I meant the SAI. Thanks for the info. wbarnier

Help While we are waiting for the new tunes I want to ask Pieman a question. Would it be OK to remove the AIR on my stock 2012 Speedmaster? I have the factory TORS map in it now along with a set of FEKED old style Burgess mufflers which sound beautiful by the way. Also would it help any to do...

Tunes for BS Pieman how much longer until new tunes are available for the EFI Speedmasters? Waiting patiently. wbarnier

I have a 2012 stock Speedmaster seat for sale. Only used it for a short while. It is in perfect condition. $125.00 plus shipping. Was to low for me.

I was wondering what other people did about the holes in the headlight brackets after they relocated the ignition switch or the turn signals. Anyone have any pictures they would post? wbarnier

Thanks for all the tips on polishing my covers guys. I'll post a picture when I complete it this Spring. wbarnier

I would like to remove my 3 engine covers and strip and polish them. Anything special I have to watch out for when removing the alternator or primary covers? Will something fall out or is there something I have to watch out for when removing them? The bike is a 2009 Base Black one. Are there any...

Anyone have a Triumph brand summer screen and brackets they would like to sell? I don't care if the screen is scratched up or broken because I only need the brackets. wbarnier

Anyone seen the new exhaust system at British Customs? Better yet, does anyone have them or pictures with them on thier bike? There the ones called British Customs Mini Reverse Cone Exhaust System. wbarnier

Anyone know if someone makes mid-riser exhaust pipes and mufflers similar to the old T100C pipes used on 650s that will work on my 2009 Bonny SE? wbarnier

Here's a picture of my new tail light and turn signals Chris. wbarnier.

Thanks for your help Chris. wbarnier

I have a question for Speed3Chris. I am installing the Lucas + LED tail light that you did the install on and I was wondering if you could tellme something about the wiring? The original tail light has only a red and black wire on it. I assume that is black for ground and red for positive. The...

I know this is going to sound lame but I have to ask. I bought a foam air filter for my 2009 Bonnie standard and a bottle of filter oil. It says to put the oil into the foam and squeeze out all the excess before installing it. The foam is permanently attached to the metal frame of the body so I...

restrictor plate Thank you Chris. You have been very helpful. I feel I should be able to do it now. I'll let you know how it works. Bill

restictor plate Chris, I did a search on restictor plate removal and all I saw was guys chopping up their airbox and no real good pics on plate removal. Could you give me any tips on how to go about removing my restrictor plate? As I said I am putting in a Uni filter soon and as long as I...

airbox mods Speed3Chris, Would you relate to me what you have done to your engine as far as mods to the intake, airbox, and exhaust. Especially with the airbox. I have a 2009 Bonnie Standard with the factory TORS which are loud enough for me. I've removed the snorkle and ordered a UNI...

fork oil I have a 2009 Bonnie Black with 1400 miles on it and I replaced the stock fork oil with 7.5 weight Repsol fork oil. The amount was approximately one quart which was enough for both sides. I had the forks out to install rubber gaiters so I figured that would be a good tme to do it. If...

desires I would love to be able to buy a finned aluminum cam cover that looks similar to the one on the old 67 to 70 BSA 650 twins. The stock rounded looking cover that Triumph uses now was one of the biggest turn offs about the appearance of the New Bonneville. Also, if someone would make...