Recent content by Frank

  1. F

    Bonneville/Speedmaster-Back Firing

    I know I can eliminate the back firing during deceleration by re-programing the computer and removing all the plumbing from the heads and pipes, BUT could you plug the air hoses going to the Air Injectors in the head and leave the sensors in the pipes connected? This would eliminate the extra...
  2. F

    Speedmaster EFI

    I found the numbers of the K & N Filters for Speedmasters & Americas: RC2900. I modified my Air Box by cutting off the Tubes from the Box to the Throttle Bodies & then used the K & Ns. This way I still had the mounts my Side Cover and can use the original Air Filter hole for tools or what have...
  3. F

    Speedmaster EFI

    Does anyone know what part number of K & N Filter will fit the Speedmaster once you remove the Air Box? Thanks
  4. F

    Air Box Eliminator

    Does anyone know the part number for the K & N Filters used in the Air Box ELiminator for a EFI Speedmaster? Thanks-Frank
  5. F

    Computer Re-Program: 270 vs 360 Degree

    Does anyone one know if the 270 Degree Speedmaster/America requires a different Computer Re-Program than the 360 Degree Bonneville?
  6. F

    Removed the SAI from my T100 yesterday

    I had the Triumph shop upload the program to support the TOR mufflers when I bought my '09 Speedmaster and since switched to nearly open mufflers/pipes. I also have removed the air box & plugged the hose from the air box. It back fires and pops constantly when I let off the throttle and it has a...
  7. F

    Removed the SAI from my T100 yesterday

    Dumb question. What are SAI's? Are you talking about the Air Injectors? What keeps the computer from sending a Fault Code? My back firing and popping DRIVES me Crazy Thanks-Frank
  8. F

    BC Airbox Removal Kit EFI Thoughts

    Don't mean to sound stupid, but what is "Amsterdam"? The Triumph shop on Ave K wants to add the "Tune Boy" download for $400. I'm sure I can get the optimum out of my 270 degree EFI Speedmaster a little bit cheaper! Thanks for the quick reply - Frank
  9. F

    BC Airbox Removal Kit EFI Thoughts

    where do I find "Remaps" on line?
  10. F

    BC Airbox Removal Kit EFI Thoughts

    Dealr "Channelinspire" - I live near Dallas & have an EFI '09 Speedmaster with straight 3 1/2 in pipes, Air Cleaner Kit and what Triumph calls their "Off-Road" tune. I still have my Ox Inj. You mentioned buying a cable and re-programing. Can you offer any more directions to accomplishing this...
  11. F

    Exhaust systems

    I tried Triumph Offroad Mufflers, plus a couple of Aftermarket sets and decided to make my own. 3 1/2" pipe-90 degree slice on one end and adapted down to 1 7/8s on other & then chromed. Straight, no baffles, and LOUD! Improved power and sounds like a real motorcycle.
  12. F

    How old and how many years have you been riding?

    Started about the age of 12 or 13. Bought a new 72 Kawasaki 750 Triple and made it my daily driver and weekend racer . Gave it up for over 30 years and purchased a new 09 Triumph Speedmaster and I've "got the bug" again!
  13. F

    Odometer 'scale' question

    I have a 2009 Triumph Speedmaster and the Speedo is off quite a bit. I utilize a GPS when I'm riding and constantly compare the Speedo to the GPS. At 60mph on the Speedo the GPS shows 55mph and at 70mph on the Speedo the GPS shows 64 mph & at 80mph on the speedo the GPS shows 73mph.
  14. F

    Easy changes made a noticeable power increase

    Great, very smooth and QUITE LOUD! I had a muffler shop cut one end at a 45% angle and the other end he adapted it to a 1 3/4" pipe to fit on the exhaust pipes. I used a guy in St. Louis to chrome them. I've got about $200 in them total, but they sound Awesome!!! I was trying to get away from...
  15. F

    Easy changes made a noticeable power increase

    Thanks for the tip on plugging the hose from air cleaner to the Air Injection Solinoid. My 2009 Speedmaster got the TOR Tune the day I got it and then I removed the air cleaner snorkel, re-placed the element with a K&N and then drilled out the bottom of the element and the air cleaner housing. I...
Top